Technical Specifi Cation - Arcam CD62 Handbook

Technical specifi cation
Digital to Analogue conversion
24-bit multilevel Delta-Sigma DAC
Laser pick-up
Laser wavelength
Numerical aperture
Dynamic range
Signal to noise ratio (CCIR)
Harmonic distortion (0dB, 1kHz) <0.005%
Frequency response (±0.5dB)
Output level (0dB)
Output impedance
Minimum recommended load
NOTE: All specifi cation values are typical unless otherwise
stated.
Continual improvement policy
Arcam has a policy of continual improvement for its products.
This means that designs and specifi cations are subject to
change without notice.
Radio interference
The CD62 is a digital audio device which has been designed to
very high standards of electromagnetic compatibility.
The CD player and DAC generate, and can radiate RF (radio
frequency) energy. In some cases this can cause interference
with FM and AM radio reception. If this is the case, keep the CD
player and its connecting cables as far from the tuner and its
aerials as possible. Connecting the CD player and the tuner to
different mains sockets can also help to reduce interference.
EC COUNTRIES -– This product has been designed to comply
with directive 89/336/EEC.
USA – This product complies with FCC requirements.
Laser radiation
If an Arcam CD player is operated whilst the outer casing is
removed, invisible laser radiation could cause eye damage.
Physical
Dimensions
Weight
3 beam Power consumption
780nm
0.45 Digital output connection
106dB
>100dB
Supplied accessories
5Hz–20kHz
2.3Vrms
120
5k
E&OE
W430 x D290 x H84mm
4.6kg nett/6.1kg packe
32VA maximum
75 co-axial
optical TOSLINK
Mains lead
CR224 remote control
2 x AAA batteries
CD62
7