Using Your Cd Player; Cds With Text - Arcam CD62 Handbook

Using your CD player

1
POWER
Press this button to switch the CD player on and off. When fi rst
powered up with no CD installed the display shows:
2
LOAD
To install a CD, press
The CD tray opens – it accepts 12cm and 8cm discs. Place
the CD in the tray with the label facing uppermost. Press
again (or press
the tray. You will see the total number of tracks and total disc
time, for example...
The display returns to '0' after a few seconds. The disc is now
ready to play.
3
PLAY
Press to play the CD. To restart from track 1, press
then .
PLAY
Make sure your amplifi er's input source selector is set to the
correct input.
4
STOP
Press to stop the CD playing. The display shows '0' and the
number of tracks.
5
PAUSE
Press to pause the disc (interrupt play).
Press
PAUSE
point.
SEARCH
Press
for a particular passage within the currently playing track. If the
player is in 'PAUSE' mode the search is made at high speed
with the sound muted.
CD62
24 BIT DAC
LOAD
2
--NO DISC--
or on the remote control).
LOAD ( OPEN
, or gently push the tray in 5mm) to close
PLAY
TRACK INDEX MIN SEC
1 2 3 4 5
8 1 52.19
6 7 8
again, or to resume play from the same
PLAY
6
to search backwards, or to search forwards
PLAY STOP PAUSE
3 4 5 6
7
SKIP TRACK
To start a CD with a track other than the fi rst, press
to locate the desired track.
To select another track during play, press
track is played automatically after selection. Pressing
returns to the start of the current track. To select the previous
track, press twice quickly. To go back two tracks, press
three times, and so on.

CDs with text

LOAD
Load
You will see the total number of tracks and the total disc time
with 'CD TEXT' illuminated in the display. The artist and album
title scrolls across the display before returning to show the
artist and total number of tracks.
TRACK INDEX
ANASTACIA
Play
The track number is briefl y displayed, followed by the track title
scrolling across the display. The display returns to showing the
and
STOP
track number and time.
Track selection
When a new track is selected, the track number is briefl y
displayed, followed by the track title scrolling across the
display. The display returns to showing the track number and
time.
NOTE: The track title is always displayed when a track is
selected, either for playing or programming.
The artist is always displayed when the disc is stopped.
The button turns the text display off.
TIME
The text display supports English only.
COMPACT DISC PLAYER
TRACK
POWER
1
7
or
or . The
once
MIN SEC
1 2 3 4 5
6 7 8 9 10
11 12
CD TEXT
CD62
5