Inserting Or Ejecting A Cd - Iomega CD-RW USB 2.0 Drive User Manual

of the selected CD drive will open.

Inserting or Ejecting a CD

Press the eject button on the Iomega CD-RW drive to insert or remove discs. When you insert a CD into the Iomega CD-RW drive, the red activity light flashes.
Ejecting a Disc in Case of Power Loss
The Iomega CD-RW drive must be receiving power for normal disc insertion and removal. However, if you need to eject a disc during a power failure, use the following steps:
Never remove a disc manually while the power supply is connected to the Iomega CD-RW drive.
CAUTION!
1. Turn off your computer and Iomega CD-RW drive.
2. Disconnect the power to the Iomega CD-RW drive.
3. Insert a straightened paper clip into the
Disconnecting Your Iomega CD-RW Drive
Always close any open files and remove the CD before disconnecting the Iomega CD-RW drive. Disconnect the cable first, then remove the cable from the drive.
Using the Drive as an Audio CD Player
NOTE: The following instructions enable you to listen to audio CDs through your computer speakers. You can also connect headphones to the
drive. Plug in headphones only while listening to audio CDs.
Connecting the Audio Cable:
1. To avoid damage to your computer and Iomega CD-RW drive, turn off the power to both your computer and the Iomega CD-RW drive.
Print this User's Manual as a reference before shutting down your computer.
emergency eject hole to eject the CD.
audio jack on the side of the CD-RW