VCR Display
When DISPLAY is pressed, the display changes in the following way. (However, the following is the case when
the clock time is set and displayed in the 12-hour system.)
[TAPE COUNTER/CHANNEL]
During trmer recording or Simple Recording Timer, the display shows the record finish ti
l
display changes in the following way.
(If the "B" indicator on the VCR display is lit, cancel the timer standby mode by pressing TIMER ON/OFF and then turn on
the power.)
During Simple Recording Timer recording, "m" lights.
l
Counter Clear
Make sure the counter is displayed, then press CLEAR on the remote control.
The counter will reset to "0.00.00" when the tape is rewound completely.
l
2 8
Example:
[OPERATING MODE/CHANNEL]
Example,
[REMAINING TIME]
REMAINING/CHANNEL]
Example: [PRESENT TIME]
d, the