Display - XRPlus XRS 2004 Series User Manual

4. Menu

1.Display

- Video Setup for Watch Mode
1-1. OSD
1-2. MONITOR
• Every System Setup can Change or Maintain
1 at Menu (6 Setup)
•
Move to Menu Using by Up
& Down Button
•
ENTER
To Open Detail Menu, press "the Enter"
•
RETURN
Return to Previous Menu or Return to Watch Mode
• Status Bar : Record Condition Mark On/Off
(Recording: Red, Pre-recording : Green)
• Camera Title: Setup Camera Name to Show Left-Upper Side
• Event Icon: Indicate the menu location by icon
• Border : Border Mark On/Off when 4CH Division Watch Mode
• Border Color : Select Border Color
(White, Blue, Red, Yellow, Green, Gray)
• Motion Sensor : Set Up Motion Sensor
• Alpha Blending: Choose the transparency(1~100)
• GUI Blending
• Sequence Dwell : Setup Rotation Cycle Time
(1~60 Sec.) when 4CH Rotation Mode at Watch Mode
• Spot-Out Dwell : Setup Spot-Out Time Cycle
(1~60 Sec.) to Transmit Video
• De-interlace Mode : Remove Screen Spread on High
Resolution , Low Frame ※Only Applying When D1(704X480)
• Alarm Pop-Up Mode: When alarm happen, Alarm happened
• Alarm Pop-Up Dwell: Alarm Pop-up Time(1~60Sec.)
Tip
• When finishing that change the setup data,
Press the
12
channel Pop-up
certainly.