Related Manuals for XRPlus XRS 1000 Series
Summary of Contents for XRPlus XRS 1000 Series
-
Page 1: Digital Video Recorder
Stand Alone Type Digital Video Recorder USER’S MANUAL XRS 1000 Series This manual is written based on 1016... -
Page 2: Table Of Contents
Index User’s Manual CHAPTER 1 Specification & System organization 1. Product Contents List -------------------------------------------------------- 4 2. System Organization --------------------------------------------------------- 5 CHAPTER 2 Description 1. Front Panel --------------------------------------------------------------- 6 2. Rear Panel --------------------------------------------------------------- 6 3. Remote Controller ---------------------------------------------------------- 7 CHAPTER 3 Display 1. - Page 3 Index User’s Manual CHAPTER 5 MENU Go to Menu -------------------------------------------------------------- 13 Go to System Setup -------------------------------------------------------- 13 1. Display ------------------------------------------------------------------ 14 2. Camera ----------------------------------------------------------------- 19 3. Sound ------------------------------------------------------------------- 22 4. System ------------------------------------------------------------------ 23 5. Event/Sensor ------------------------------------------------------------- 29 6. Disk Management ---------------------------------------------------------- 31 Go to Record Menu -------------------------------------------------------- 32 1.
-
Page 4: Specification & System Organization
Specification & Organization User’s Manual 1. Product contents List Please Confirm the Contents When open Package. ① Basic Contents XRS 1000 Series Power Cable Remote Client Remote Controller AAA Battery X 2 Program Install CD ② Option Contents ( 4 ) -
Page 5: System Organization
Image Printer Alarm Sensor #1-4 Relay Out Camera #1-16 Alarm Input/Out NETWORK AVI Backup TCP/IP Video In WEB Client XRS 1000 Series Backup Video Out Remote Controller AV Monitor Monitor (It is not supported at the XRS 2016) ( 5 ) -
Page 6: Description
Description User’s Manual 1. Front Panel ① ② ③ ① Power : System Power On/Off ② Led indicator : Indicate Present System Status information. (POWER, RECORD, NETWORK, Alarm) ③ USB PORT: USB port for use the USB memory stick and USB HDD Backup. ⑪... -
Page 7: Remote Controller
Description User’s Manual 3. Remote Controller POWER MENU: Open Menu System ON/OFF Channel Selection Button (16ch Available, #1~4 Button) RETURN ENTER: Apply Setup Change Cancel Setup or Return to Search Controller : Control Playback Option, Previous Menu Movement, PTZ/Focus Control Change Screen Open PTZ/IRIS Mode... -
Page 8: Display
Display User’s Manual 1. System Power ON • Press Power Button to Start System • After Checking Hard Disk, Need input Password to Operation [Default Password 1234] • Initial Screen View Mode is Quad Division Mode and Recording Mode Picture for Power On after Finishing Installation •... -
Page 9: Screen Division And Auto Rotation
Display User’s Manual 2. Screen Division and Auto Rotation • Screen Division changes with 'SCR MODE' button on Remote controller • pressing 'SCR MODE' or 'SEQUENCE‘ buttons to see one screen division mode (all the channels on screen with full screen division mode) Auto Rotation or Full Screen 9 Screen Division 4 Screen Division... -
Page 10: Ptz/Focus Control
Display User’s Manual 3. PTZ/FOCUS Control • Control Camera PTZ (Pan/Tilt/Zoom) • Press PTZ Button to Open PTZ Menu • Each icon mean the button of front keyboard. • F: Focus I: IRIS • Control each function by front keyboard. 4. -
Page 11: Search
Search User’s Manual Go to Search Mode • Press Search Button and Log-In Administrator or Manager • Use Direction Key to Move Menu • To Open Each Menu Press Enter • To Return to Previous Press Return (Move to Previous Menu or Exit Search Mode and Return to Watch Mode) 1. -
Page 12: Search By Event
Search User’s Manual • Control Playing Video : Basic Playing Mode (Normal Speed (1X) Forward Playing) : Normal Speed Backward Playing : Pause Video : Fast Forward (2 ~ 64 Speed) : Fast Backward (2 ~ 64 Speed) ※ Press Normal Forward/Backward Button in Pause, Move to Next/Previous Frame. 2. -
Page 13: Menu
Menu User’s Manual Go to Menu ① Press SETUP Button ② Ask Password ③ Input Password Using by Channel Select Button [1][2][3][4]) ④ After Input Password Press Enter to See Menu • Initial Administrator, Manager, User Password is 1234. • Showing Password as * •... -
Page 14: Display
Menu User’s Manual 1.Display - Video Setup for Watch Mode Every System Setup can Change or Maintain at Menu (6 Setup) Move to Menu Using by Up & Down Button To Open Detail Menu, press ‘the Enter’ ENTER RETURN Return to Previous Menu or Return to Watch Mode 1-1. - Page 15 Menu User’s Manual 1-2. MONITOR • Sequence Dwell : Setup Rotation Cycle Time (1~60 Sec.) when 4CH Rotation Mode at Watch Mode • Spot-Out Dwell : Setup Spot-Out Time Cycle (1~60 Sec.) to Transmit Video • De-interlace Mode : Remove Screen Spread on High Resolution , Low Frame ※Only Applying When D1(704X480) •...
- Page 16 Menu User’s Manual • Choose Add to Add Sequence • Input Sequence Title • Choose Activation • Save and Exit • When input sequence title, You can use virtual keyboard by pressing enter button. ( 16 )
- Page 17 Menu User’s Manual • Choose ADD in the Sequence to input title • To add name using Mouse or Remote Controller • Change activation OFF to ON ( 17 )
- Page 18 Menu User’s Manual • After pressing ‘Enter’ button on Remote Controller or Front Panel, select screen division using ◀ or ▶ buttons and type in channel number • Press ‘Return’ button on Remote controller or ‘Cancel’ button on front panel and click ‘Save & Exit’. •...
-
Page 19: Camera
Menu User’s Manual 2.Camera - Setup Camera 2-1. Camera Title • Covert : Setup Covert On/Off *What’s Covert? When Covert On Watch Mode, Display Video is Hidden, but Recording is On. • Title : Setup Camera Name by Virtual keyboard •... - Page 20 User’s Manual 2-2. Color Setup • Control the Monitor Bright, Contrast, Color, Tint • All Setup Possible to Control 0~100 • Setup Channel by Channel 2-3. PTZ Setup • Address : Select PTZ Camera Address • PTZ Protocol : Select Kind of PTZ Camera •...
- Page 21 Menu User’s Manual 2-4. Motion Sensor • Choose the Partial Motion Region channel by channel • Sensitivity: 1~10 • Move Cursor by Direction Key and Press Enter at Selected Region • Select All : Select Entire Region • Deselect All : Cancel Region Setup •...
-
Page 22: Sound
Menu User’s Manual 3. Sound 3-1. Audio - Audio Setup • Live Audio : Audio Output ON/OFF Live Audio Output from Audio In Terminal • Audio Monitoring Channel: Select Channel for Audio Output Nr. 1~4 Audio In • Network Audio TX: Choose the Audio transmission •... -
Page 23: System
Menu User’s Manual 4. System - Basic Environment Setup 4-1. date/time ※ First of all, Timezone should be setup as your location. • Date TIME: Setup Present Date If Time Setup to Past Date, Ask Delete Data for the Past Date. NO->Date/Time No Change, YES->After Delete Past Data and Change Date/Time •... - Page 24 Menu User’s Manual 4-2. Network • IP Address : Input IP Address • Gateway : Input Gateway IP for Internet Server • Subnet Mask : Input Subnet Mask IP • DNS Server: Input DNS Server IP • DDNS Server: Input DDNS Server IP •...
- Page 25 Menu User’s Manual 4-3. Mail • Server: Setup the mail server • Setup by Virtual Keyboard after press the “ENTER” • Port: mail server port • Security: On/Off • User & Password: input the DVR login user ID and Password. 4-4.
- Page 26 Menu User’s Manual User setup • It is consisted 3 User Group as Administrator, Manager, User. • Total 7 user belong to 3 User Group can be made. • Input User ID, Password. • Choose the Group. • Input the E-mail Address. •...
- Page 27 Menu User’s Manual 4-5. System Information • F/W Version: Server Firmware Version • H/W Version : Hardware version • Video Signal Type: NTSC or PAL • Disk Capacity: used HDD capacity of the total HDD capacity • IP Address: DVR’s IP Address •...
- Page 28 Menu User’s Manual 4-6. Factory Default • Press “Press” to Start Initialize. • Showing Warning Message and Press OK to Run Initialize. • If do Factory Default, Every Setup is Initialized, but Saving Image is Not Erase. 4-7. CONTROL DEVICE •...
-
Page 29: Event/Sensor
Menu User’s Manual 5. Event / Sensor 5-1. HDD Event • Drive: HDD connected location • Smart Alarm: On/Off • Check interval: HDD checking Time 5-2. Alarm Input • Operation: Setup Alarm Sensor Connection Status (enable/disable) • Type : Setup Alarm Sensor N/Open, N/Close Type ( 29 ) - Page 30 Menu User’s Manual 5-3. Alarm Output ※ Setup each channel when alarm, video loss, motion are happened. • Channel : Select Channel • Mode: Setup Reacted Relay as Latched/Transparent Mode. • Type: Setup Relay Type N/Open or N/Close. • Operation: Setup Relay Connect with Alarm Sensor. •...
-
Page 31: Disk Management
Menu User’s Manual 5-5. E-mail Notification • Choose the function by button. • If the alarm, video loss, motion and HDD event are happened, send the notification at the E-mail. 6. Disk Management • Disk Overwrite : Select Overwrite Permission when Hard Disk Full ON: Overwrite Hard Disk from Oldest Data OFF: When Hard Disk Full, Stop Recording and Buzzer Activate •... -
Page 32: Go To Record Menu
Menu User’s Manual Go to Record Menu • Choose “Record Menu” 1. Recording Operations • Schedule Mode: Choose the DAILY or WEEKLY. • Pre-Event Recording Time : Setup Pre-Event recording Time. (1~5 sec) • Post-Event Recording Time: Setup Post-Event recording Time. (1~5 sec) ( 32 ) -
Page 33: Continuous/Motion Record Schedule
Menu User’s Manual 2. Continuous/Motion Record Schedule • Setup each channel • Put the choose area at here and press “Enter” button. • Continuous record setup • Motion record setup • Setup each day • Setup each channel ( 33 ) -
Page 34: Alarm Record Schedule
Menu User’s Manual 3. Alarm Record Schedule • Set the time for Alarm setup with Mouse or Remote Controller • Set the recording resolution, frame and quality per each channel • Set the alarm time per each channel ( 34 ) -
Page 35: Go To Archiving
Menu User’s Manual Go to Archiving 1. CD-RW and USB Back Up ① Device : Indicate CD-RW Model and USB MEMORY Model Automatically. If you use the CD-RW and USB memory (or USB HDD) together, it can choose the CD-RW and USB by ▲▼Button. ②... -
Page 36: Client
Client User’s Manual • System Requirement ① Main Board (CPU): Pentium-500(Minimum), Pentium 4 recommend ② OS: Higher than Windows 98,DirectX 7.0A ③ Memory (RAM): More than 128 M ④ VGA: Graphic card that support the DIRECT-X ※IMM4 Codec (When Playback Backup File) Remote Program Install ①... - Page 37 Client User’s Manual ③ After installation, Click ‘Close’ • appears remote agent icon on desktop ④ Appears ‘Remote Agent’ ‘Backup Player’ 2 icons on desktop ( 37 )
-
Page 38: Function Introduction
Client User’s Manual 1. Function Introduction ③ ④ ⑤ ⑥ ⑦ ① ⑧ ⑨ ⑩ ⑪ ⑭ ⑫ ② ⑬ ① Main Screen Image : Showing Present Surveillance Camera Image ② Camera Selection Button : Indicate Connected Camera No. & Select Image to Click Camera No. ③... -
Page 39: Local Setup
Client User’s Manual 2. LOCAL SETUP 2-1. CONNECT MANAGER ② ① ③ ④ ⑥ ⑤ ① GROUP : Registered DVR sites’ list ② DVR Information : registered or to be registered DVR information ③ CAMERA ASSIGNMENT : to choose images to monitor or to see chosen channel ④... - Page 40 Client User’s Manual 2-2. CONNECT MANAGER ① ② ③ ④ ① OSD Display : Setup OSD to display on Monitor ② Video Output : Select Video Output Signal ③ Video Mode : Setup Sequence interval time and Alarm Popup use ④...
- Page 41 Client User’s Manual 2-3. DVR Add • Click right button of Mouse and setup ‘‘ADD Group’ • Type Group Name and click ‘OK’ button • Type DVR information and choose channels for live monitoring • Click ‘ADD’ button to add the information and try to connect to the DVR If the connection fails, check DVR information and network status ( 41 )
- Page 42 Client User’s Manual 2-4. DVR Server Remote Setup • Choose the DVR for setup and click the “Setup” button. • Click DVR System Setup Tap, Password Input Window Open After Input Password, Setup Window Pop-up. • DVR System Tap Indicated Only when Connect as Administrator. •...
- Page 43 Client User’s Manual ① Record Setup • Record Operations - Schedule Mode: Weekly or Daily - Sunday ~ Saturday - Pre Event Recording Time: 0 ~ 5(Second) - Post Event Recording Time: 5 ~ 180(Second) Alarm Recording Schedule / Continuous/Motion record Schedule / Panic Record Setup ‘Set’...
- Page 44 Client User’s Manual ② Camera Setup • Status/Title Setup - Setup for Each Camera (Connection Status or Camera Name). • Color Setup - Setup Color for Each Screen. • Covert/PTZ Setup - Setup Each Camera Covert Function & PTZ Protocol. •...
- Page 45 Client User’s Manual ④ Event/Sensor Setup • HDD Event - Drive ID: HDD Connected location - Smart Alarm: On/Off - Temperature: HDD Temperature - Polling Time: HDD Checking Time • Alarm Input - Setup for Each Channel Alarm Connection & Type. •...
- Page 46 Client User’s Manual ⑤ System Setup • System Info - Possible to Watch DVR System Status. • SMTP - Setup the mail server and user’s E-mail. • Users - Setup the Users. - Click the “Add” or “Modify” button. • Network Speed - set up the transmission speed of video •...
-
Page 47: Monitoring
Client User’s Manual 3. Monitoring 3.1 Selection Network I/D • Select I/D to Connect Server. • I/D can be Add, Change, and Delete at Setup 3.2 Screen Division Selection • 1*1 View : Showing One (1) Video which User Selected (Selection Video by Camera Selection Button) •... - Page 48 Client User’s Manual • 9 Division Mode • 16 Division Mode 3.3 P/T/Z Control • Press the PTZ Button. • P/T/Z Controller : Camera P/T/Z Control by Direction Keys • FOCUS/ZOOM Select Button : Focus or Zoom Control by +,- Button •...
- Page 49 Client User’s Manual 3.4 AVI File Conversion • Click AVI Conversion Button to Start AVI File Conversion. • During AVI Conversion Showing a Message and before 1 Click ‘Stop” Save AVI File continuously . • ‘Press ‘Stop’ to Open Designate File Name & Saving Location, and Save AVI File. •...
- Page 50 Client User’s Manual 3.6 Event Viewer ① ② ③ ④ ⑤ ⑥ ① Indicate Event Occurred Order No. ② Indicate Event Occurred DVR No. ③ Indicate Event Occurred Camera No. ④ Indicate Event Occurred Time & Date ⑤ Indicate Event Detail Description ⑥...
-
Page 51: Search
Client User’s Manual 4. Search 4.1 Function Introduction ③ ① ④ ⑤ ⑥ ⑦ ⑧ ② ① Search Screen : Playing Selected Video ② Search Bar : Search & Indicate Camera Recording Situation by Time Bar ③ LIVE : Return to Watch Mode / SETUP : Open Setup to Change Network Setup or Option ④... - Page 52 Client User’s Manual 4.2 Search Method ① ⑥ ⑤ ③ ② ④ ⑦ ① Indicate 0~24 Hour ② Indicate Recording Situation (Blue : No Record, Yellow : Recorded Image at the Time) ③ Search Bar : Select Video to Drag Mouse Search Controller in Recorded Area ④...
- Page 53 Client User’s Manual 4.3 SEARCH Option ③ Save Image ① Backup ⑤ Log Search ② Backup Play ⑥ Event Viewer ④ Print Image ① Backup – Backup Image from Server to Remote PC • Time Range Designate Backup Image Data Length to Input Start Time & End Time. •...
- Page 54 Client User’s Manual ② Backup Play (DVR Player) – Transfer to DVR Player ① ② ④ ③ ⑤ ① Showing Image (Possible to Only 1*1View Mode) ② Backup File Open to Play First Video Ex. : ch02_04131730_04131735.rec ( Backup File for # 2 ch. Apr.13, 17H30M ~17H35M ) ③...
- Page 55 Client User’s Manual ③ Save Image – Capture Image & Saving Image at Hard Disk or Removable Disk • Click ‘Save Image’ Icon During Playing Video • Designate File name, File Type (JPG,BMP), and Location and Press Saving • Conversion and Saving Image from Remote Viewer ④...
- Page 56 Client User’s Manual ⑤ Log Search – Find Video Centering around Event Log at DVR. ① ② ③ ④ ⑤ ⑥ ⑦ ⑧ ⑨ ⑩ ⑪ ① Input Start Time and End Time at the Selected Date to Search Event When Press Search Button, Event Output at the Below Window ②...
- Page 57 Client User’s Manual ⑥ Event Viewer- Showing Present Event in Server & Find Image ① ② ③ ④ ⑤ ⑥ ① Indicate Event Occurred Order No. ② Indicate Event Occurred DVR No. ③ Indicate Event Occurred Camera No. ④ Indicate Event Occurred Time & Date ⑤...
-
Page 58: Web Client
Client User’s Manual 5. Web Client • WEB Client Connection ① Input IP Address or URL for DVR Server at the Internet Explorer Address Input Place. ② When Appear Active-X install Message, Please Click Confirm or Continue. ③ Showing Web Client Window at Internet Explorer. ④...