Philips 107S7 Service Manual page 82

17" CDT Color Monitor
•
Base should not break plastic when attempting to rotate it past the stops.
5.12 Movement of unit with base
•
Base must have non-marring, non-staining feet.
•
Unit must tilt up and down with no "Stick / Slip".
•
Base must provide sufficient friction to hold unit in desired position after adjusting tilt.
5.13 Label
•
Regulatory label / Carton label should follow Philips requirement.
•
Detail document refer to Philips Engineering Reference Book.
5.14 Product Dimensions / Weight
•
Unit dimension (with stand) -
•
Packed unit dimension (carton) -
•
Net weight -
•
Gross weight -
5.15 Transportation
Transportation standards refer to UAN-D1534/00 and TYE-M0002.
5.15.1 Transportation packages
Packaging and wrapping shall be sufficient to protect the product against damage or loss during shipment
from the supplier to the destination specified in the purchase order. All packaging materials are subject to test
and evaluation per TYE-M0002. The cushion material shall be constructed using EPS material.
Carton paper (Double wall AB flute corrugate board, colour brown)
5.15.2 Transportation test procedures
The overall test sequence is: vibration test, drop test and when applicable cold drop test. The sequential tests
have to be carried out using the same packaging.
Vibration, drop test should be performed at ambient temperature (20°C to 23
humidity (40% to 65%).
397mm (W) x 382mm (H) x 423.5mm (D)
460mm (W) x 450mm (H) x 526mm (D) for China, India
446mm (W) x 420mm (H) x 475mm (D) for other regions
13.5 kg
15.8 kg (for China, India)
15.4 kg (for other regions)
Bursting -
Compression -
2
19.3 kgf/cm min
670 kgf min
82
o
C) and relative
107S7