Philips 107S7 Service Manual page 14

17" CDT Color Monitor
EU
BP
BB
TB
HB
HS
TM
65
93
VF
VB
VI
HL
BC
TC
D. To switches the input signal to the other Timing Mode. Please follow step A ~ C to get the optimum picture.
E. Select the "
returned to the original OSD window.(user's operating condition)
F. The setting data of the CONTRAST, BRIGHTNESS, COLOR TEMPERATURE are common mode saved
in the memory. Don't needed adjust it individual at every timing Mode and save in the memory.
3. White Balance, Luminance adjustment:
A. Press MENU Key to show OSD menu ,and press the down Key to select the "zoom" function, then press
the menu Key to enter second menu, press the down key to select "
setting area for modulation.
B. Brightness & contrast ratio MAX.
C. Raster Max modulation: Raster Pattern, adjust R or B bias and G2, make x=270±10, y=290±10, Y=2.0±0.2
2
cd/m
D. Raster cut off modulation: Raster Pattern, adjust brightness to make Cut off: 0.08±0.02 cd/m
9300K & 6500K into it.
E.Small white screen appears, Raster cut off, make SB to select 4
(1).Choose 4 for LH ,set R or G or B gain, make x=283±15, y=297±15，Y=350±15 cd/m
9300K color temperature, set R or G or B gain, make x=313±15, y=329±15,Y=300±15, then save it into
6500K color temperature, then exit the factory setting area.
(2). Choose 3 for LH,set R or G or B gain, make x=283±15, y=297±15，Y=270±15,then save it into 9300K
color temperature; set R or G or B gain, make x=313±15, y=329±15,Y=250±15,then save it into 6500K color
temperature, then exit the factory setting area.
(3). Choose 2 for LH,set R or G or B gain, make x=283±15, y=297±15，Y=210±15,then save it into 9300K
color temperature, set R or G or B gain, make x=313±15, y=329±15,Y=200±15,then save it into 6500K color
temperature, then exit the factory setting area.
EHT Current
B Plus
Bottom Balance
Top Balance
HS Wave Balance
HSWAVE
User Timr:00273hours
Save 6500C color
Save 9300C color
V-Focus
VLIN Balance
V Linearity
H Linearity
Bottom Corner
TOP Corner
" RETURN function and press the MENU Key, then the Factor Preset window will be
14
B-Gain
R-Gain
Brightness
Contrast
V-Moire Reduce
H-Moire Reduce
PIN-Balance
Parallelogram
Trapezoid
Pincushion
Rotation
V- Center
V-size
H-Center
H -size
"above 10S,then enter into factory
2
2
,then save it into
107S7
,and then put