Philips 107S7 Service Manual page 78

17" CDT Color Monitor
3. Front Of Screen Performance
3.1 CRT characteristics
Vendor
CRT Type Number
Screen & Mask
Screen Diagonal Size
Phosphor Area
VIS (front bezel opening)
Neck size
Deflection Angle
Yoke impedance
Phosphor Dot Pitch
Phosphor Type
Light Transmission rate
Surface Treatment
Surface Resistance
CRT net Weight
3.2 Display image / Geometric distortions
•
Nominal display size -
•
Size control range -
•
Raster centering -
•
Image centering -
•
Position control range -
•
Line straightness -
•
Image tilt -
•
Dynamic EHT size regulation -
•
Static EHT size regulation -
•
Image size stability -
•
Linearity [(max–min)/mean] -
Flat screen & Shadow mask
325mm x 244mm
LH: xxx uH
LV: xxx mH
RH: xxx Ω
RV: xxx Ω
P22, medium short persistence
Anti glare/Anti static
306mm x 230mm ± 4mm for all preset modes.
306mm x 230mm ± 10mm for preload modes.
Nominal total size: -15mm to full scan.
< 4mm for prime mode.
< 5mm for all preset modes.
< 12mm for preload modes.
H: ± 10mm minimum, V: ± 8mm minimum.
Border overall distortion < 2.0mm for all preset modes, the
waviness of any vertical or horizontal should be less than 1.0mm
over a 50mm distance.
< 1.0mm (each side).
< 1.0mm (each side).
< 1.5mm (each side).
< 1.0% (110Vac ~ 240Vac) as a function of supply voltage.
< 1.0% (5 ~ 40ºC) as a function of temperature.
Pattern: 12 x 9 blocks
Prime modes: 1024x768@85, 1024x768@75.
Overall H&V < 10% (prime modes).
LPD
444mm
29.1mm
90º
0.25mm
78
CPT
Flat screen & Shadow mask
444mmm
325mm x 244mm
29.1mm
90º
LH: xxx uH
LV: xxx mH
RH: xxx Ω
RV: xxx Ω
0.25mm
P22, medium short persistence
Anti glare/Anti static
107S7