Sharp LC-42SH330 Service Manual page 22

LC-26SH330, LC-32SH330, LC-42SH330
2. Remove the 4 screws. Detach the Neck as Fig.36
Step 2. Remove the REAR COVER Assy.
1. Remove the 16 screws. Detach the
Step 3. Remove the RS232, Main, Power board and the Speakers.
1. Disconnect 5 cables and remove the 8 screws. Detach the Main, RS232 board as Fig.39 and Fig.40.
Fig.36
REAR COVER as Fig.37.
Fig.37
Fig.38
22