TP-Link TD-W8950ND User Manual page 101

150 mbps wireless n adsl2 + moderm router

Hide thumbs Also See for TD-W8950ND:

Table of Contents

TD-W8950ND

and click the "Virtual Servers" submenu. On the "Virtual Servers" page, click Add, then on the

"NAT-Virtual Servers" page, enter use "80" as service port, and your IP address next to the

"Server IP Address", assuming 192.168.1.188 for an example, and remember to click the

Save/Apply button.

Note:

Because the WEB Server port 80 will interfere with the WEB management port 80 on the modem

router, you will be prompt to change the WEB management port number to avoid interference.

The wireless stations cannot connect to the modem router.

1) Make sure the "Enable Wireless" is checked.

2) Make sure that the wireless stations' SSID accord with the modem router's SSID.

3) Make sure the wireless stations have right KEY for encryption when the modem router is

encrypted.

4) If the wireless connection is ready, but you can't access the modem router, check the IP

Address of your wireless stations.

150Mbps Wireless N ADSL2+ Modem Router User Guide

Table of Contents