Guidelines For Service Work Safety - SSANGYONG D20DTF Information

01-6
0000-00

1. GUIDELINES FOR SERVICE WORK SAFETY

1) For Safety
To maintain and operate the vehicle under optimum state by performing safe service works, the
service works should be done by following correct methods and procedures.
Accordingly, the purpose of this manual is to prevent differences that can be caused by
personal working method, skill, ways and service procedures and to allow prompt/correct
service works.
While using this manual, there are a lot of Note or Notice having below meaning.
Note means detailed description of supplementary information on work procedure or skill.
Notice means precautions on tool/device or part damages or personal injuries that can
occur during service works.
However, above references and cautions cannot be inclusive measures, so should have habits
of taking concerns and cautions based on common senses.
2) Equipment
- Korando C is FF (Front Engine Front Drive) type vehicle, and engine and powertrain system
are integrated into the engine compartment. Thus 2-post lift and general equipment are
needed when working on the engine and transmission.
- Major dedicated equipment: Engine and transmission jack (use the one for Chairman W),
Engine stand, Engine crane, transmission jack, Engine hanger
D20DTF ENGINE INFORMATION
korando 2010.10
Engine crane
Engine stand
Transmission jack