Optional Accessories - Lennox Hearth Products 1900HT-M Installation And Operation Manual

OPTIONAL ACCESSORIES- Model 1900HT-M
Note: Install and use accessories per instructions provided with the accessory kit.
Catalog # Model Description
14M67 OAFD-S Outside Air Floor Duct
5 1/4" Square
14M68 BCP-19 Back Cover Plate
14M22 BK-100 Blower Kit
Includes Dial-A-Temp for
Variable Speed Control
14M21 SSK Stove Stat Kit
Thermally Controls Blower
70K99 TSPK-B Touch-up Spray Paint Kit,
Black 12 oz Spray Can
Outside Air Floor Duct
Outside air can be delivered for combustion air by utilizing this
floor penetration duct.
(Duct penetration measures 5 ¼" square)
Back Cover Plate
(BCP-19)
See illustration above. When using outside combustion air, the
back cover plate is required to seal off the primary combustion
air intake, so that it can no longer draw air from within the room.
(OAFD-S)
Blower Kit (BK-100)
A Blower Kit (includes rheostat for variable speed con-
trol) is available for increased heat circulation.
Variable Speed Control, Dial-A-Temp
Stove-Stat Kit (SSK)
To automate the blower system an additional Stove-Stat
kit can be purchased. The Stove-Stat is a heat sensor
switch that will automatically turn on the blower when the
stove is hot and automatically turn it off when the stove is
cool.
PAGE 22