Axis P5534–E User Manual page 22

Ptz dome network camera

Hide thumbs Also See for P5534–E:

Table of Contents

AXIS P5534–E PTZ Dome Network Camera

Configure the Live View Page

•

Select Enable recording button to enable recording from the Live View page. This button is available when using the

AMC viewer. The recordings are saved to the location specified in the AMC Control Panel. See AXIS Media Control

(AMC) on page 12.

User Defined Links

To display user-defined links in the Live View page, select the Show custom link option, give the link a name and then enter the URL

to link to. When defining a web link do not remove the 'http://' from the URL address. Custom links can be used to run scripts or

activate external devices connected to the product, or they can link to a web page. Custom links defined as cgi links will run the

script in the background, in a hidden frame. Defining the link as a web link will open the link in a new window.

Output Buttons

External I/O devices connected to the Axis product's output ports can be controlled directly from the Live View page.

To display output buttons in the Live View page:

1. Go to Setup > Live View Config.

2. Under Output Buttons, select the type of control to use:

Pulse activates the output for a defined period of time. The pulse time can be set from 1/100 second to 60

seconds.

Active/Inactive displays two buttons, one or each action.

To configure the active and inactive states, go to System Options > Ports & Devices > I/O Ports and set the port's Normal state.

Table of Contents