Setup - Security Mode - Panasonic X-Plus Series SP-DRH04 User Manual

3-7. Setup – SECURITY Mode
Press the SETUP button and select SECURITY icon. Then, the SECURITY menu is displayed as picture
below. Navigate through the menu items using the mouse or the control button (
control and change the value of the menu item.
Item
USER
AUTHENTICATION
EVENT AND NOTIFICATION
HEALTH CHECK- Select Yes or No. Yes is sending an email or not
RESTART- Select Yes or No. Yes is sending an email or not
SHUTDOWN- Select Yes or No. Yes is sending an email or not
PANIC RECORD- Select Yes or No. Yes is sending an email or not
ALARM-IN- Select Alarm –out or not and sending an email or not
MOTION DETECTION- Select Alarm –out or not and sending an email.
VIDEO LOSS- Select Alarm-out, Beep and Sending an email
HDD TEMPERATURE- Select Alarm-out, Beep and Sending an email
HDD BAD SECTORS- Select Yes or No. Yes is sending an email or not
HDD ALMOST FULL- Select Yes or No. Yes is sending an email or not
HDD FULL- Select Yes or No. Yes is sending an email or not
HDD FAILURE- Select Alarm-out, Beep and Sending an email
Figure 3.7.1. SICURITY setup screen
Table 3.7.1. Menu Items in PASSWRORD Setup Screen
ADMIN only can access to the menu.
PASSWORD CHECK:
Select either V or blank for the functions such as
Setup, Playback(PB), PTZ, Record OFF(R/OFF), and Network
V check: Ask for a password when the given function is selected for all
users.
Description
37
◀ ▲ ▶ ▼
) on the remote