Panasonic X-Plus Series SP-DRH04 User Manual page 18

NO Connection
1 VIDEO IN
2
CVBS
3 SPOT
4 AUDIO IN
5 AUDIO OUT
6 VGA OUT
7 HDMI OUT
8 ETHERNET
9 SENSOR IN
ALARM OUT
RS-485
10
POWER SOCKET
11
USB Port
12
GROUND
14
NO Connection
VIDEO IN
1
2 CVBS
3 SPOT
4 AUDIO IN
5 AUDIO OUT
6 VGA OUT
7 RS-232
8 ETHERNET
connectors for video input. (NTSC/PAL)
8
Video output termal
Spot out terminal
4 connectors for audio input.
1 connector for audio output.
Connector for VGA monitor.
HDMI out terminal.
RJ-45 connector for LAN connection.
4 connectors for sensor device connection.
1 connector for alarm device connection.
Provides simple On/Off switching by using relay. 0.5A/125V,
1A/30V
RS-485 control terminal
Connect DC12V 5A Adaptor
To archive still-image or video into a USB memory or
upgrade firmware with USB memory stick, connect a USB
memory to the USB terminal.
Use for ground port
2 3
1
Figure 2.1.5. Rear panel (SP-DRH16)
connectors for video input. (NTSC/PAL)
16
Video output termal
Spot out terminal
4 connectors for audio input.
1 connector for audio output.
Connector for VGA monitor.
For engineering use only.
RJ-45 connector for LAN connection.
Purpose
5
13
4
Purpose
18
7 9
11
6 12 8
10