Operation - Sony Trinitron KV-32XBR48 Operating Instructions Manual

Using the Yellow Labeled Buttons for PIP Operations.
CH +
Press to change the TV channel in the secondary picture (+ to increase the channel number
and – to decrease).
CH –
For PIP, the channel in the window picture will change.
For P&P, the channel in the left picture will change.
Press to move the location of the window picture (counterclockwise) around the main picture.
POSITION
This function works only for PIP.
Great for copying down phone numbers, addresses, recipes, etc.
For PIP: Press to freeze the main picture and remove the window picture.
Press PIP to resume PIP viewing.
FREEZE
Press again to resume PIP viewing or press (OFF) to cancel and resume normal
TV viewing.
For P&P: Press to freeze both pictures.
Press again to resume P&P viewing or press (OFF) to cancel and resume normal
TV viewing.
Press to switch the audio and video of the main picture and the window picture for PIP, or
SWAP
between the left and right pictures for P&P.
Each time you press SWAP, the picture and sound of the two will be exchanged.
Press to access CHANNEL INDEX for direct channel selection. (see "Using CHANNEL
INDEX" on page 20)
Press to cancel PIP or P&P functions and return to normal viewing.
OFF
Notes:
• The channel being received through the
AUX jack cannot be displayed as a
window picture.
• If one of the pictures received through
PIP/P&P is snowy, the entire screen may
become unstable. In this case, erase the
snowy channel. (see "CHANNEL ERASE/
ADD" on page 26)
19