Using The Audio Menu - Sony Trinitron KV-32XBR48 Operating Instructions Manual

Adjusting your SET UP (menus) (continued)

Using the AUDIO Menu

AUDIO
TREBLE
BASS
BALANCE
EFFECT : OFF
MTS : STEREO
SPEAKER : ON
AUDIO OUT : VARIABLE
MENU
Use Exit
For detailed information on using the remote
control to modify menu settings, refer to
"Learning Menu Selection" on page 22.
To select the AUDIO
/ /
Display Highlight
MENU
To restore the factory settings
Press RESET on the remote control while the
AUDIO menu is selected.
Tip z
Press for direct selection of an EFFECT setting.
24
TREBLE
Sound Adjustment
}
BASS
Sliders
Sound Adjustment
BALANCE
Sound Adjustment
MENU
EFFECT
Customize sound
effect based on the
program's audio
type.
MTS
menu:
Enjoy stereo,
bilingual and mono
Select
programs.
SPEAKER
Custom selection of
audio output source.
AUDIO OUT
Easy control of
volume adjustments.
Adjust slider right (up) to increase high pitched sounds.
Adjust slider left (down) to decrease high pitched sounds.
Adjust slider right (up) to increase low pitched sounds.
Adjust slider left (down) to decrease low pitched sounds.
Adjust slider right (up) to emphasize right speaker volume.
Adjust slider left (down) to emphasize left speaker volume.
AUTO SRS: Automatically detects signal type and switches the TV effect between
SRS and SIMULATED.
SRS: Produces a dynamic three dimensional sound for stereo signals.
SIMULATED: Adds a surround-like effect to mono programs.
OFF: Normal stereo or mono reception.
STEREO: Select for stereo reception when viewing a program broadcast in stereo.
SAP: Select to listen to a bilingual broadcast. (non-SAP programs will be muted
when this feature is selected)
MONO: Select for mono reception. (use to reduce noise during stereo broadcasts)
Quick MTS access: Press MTS on your remote control to cycle through the MTS
options as follows: (STEREO b SAP b MONO b STEREO)
ON: Select to listen to the sound from the TV speakers alone or the TV speakers
and a separate stereo system.
OFF: Select to turn off the TV speakers and listen to the TV's sound only through
external audio system speakers.
AUDIO OUT can only be set when speakers are set to OFF.
VARIABLE: Sound output varies according to the TV settings. VOLUME, BASS,
TREBLE, and BALANCE are adjusted through the TV. Useful when you want to
use your remote control to control the output of a separate audio system.
FIXED: Sound output is held at a fixed level. VOLUME, BASS, TREBLE, and
BALANCE are fixed to the factory settings. VOLUME adjustments are made
through your stereo.