Sony XCL-X700 Technical Manual page 20

Timing Chart for High-rate scan II while using the Overlap function (slow to mid-speed shutter)
External trigger
Internal-VD
VAL
(FVAL)
Video out
Timing Chart for High-rate scan II while using the Overlap function (middle to high speed shutter)
External
trigger
Internal-VD
VAL
(FVAL)
Video out
The settings for High-rate scan II on the following
page apply to the setting of slow to middle shutter
speeds controlled by the external trigger pulse width
while using the Overlap function. When using middle
to high speed shutter speeds, input the external trigger
setting value of the external trigger interval on the
following page + 1H without using the Overlap
function as indicated in the timing chart above. The
XCL-X700/V500
Trigger interval
1~3H
Effective image interval
BLKG interval
Trigger interval indicated above + 1H
Adjusts the Exposure time within 1H (Fixed to
1H on this chart)
1~3H
Effective image interval
BLKG interval
timing chart above shows the case when the exposure
time is set to less than 1H. (Change trigger pulse width
in accordance with exposure time.) When you want to
increase exposure time to 2H or more, increase the
external trigger interval 1H by 1H, for example, to
+2H, +3H... in accordance with the desired exposure
time. Be aware that frame rate is decreased in such a
setting.
Functions of the XCL-X700
+1H
20