View Mode - Sharp LC-70UQ17U Operation Manual

Direct Button Operation

VIEW MODE

You can select the screen size.
1 Press VIEW MODE.
The View Mode menu displays.
The menu lists the View Mode options selectable for the type of video signal currently being received.
2 Press VIEW MODE or / while the View Mode menu is displayed to select a desired item on the menu.
You can sequentially select a View Mode that has its own aspect ratio.
NOTE
You can have the same settings by choosing "View Mode" on the menu items.
(See page 4-28.)
Each time you press VIEW MODE when a browser screen is shown, the display pattern toggles between a website-only screen
and a TV+Web screen.
You may not be able to change the View Mode while in 3D mode. (For the UQ17U, TQ15U, SQ17U, SQ15U and LE657U
models)
For HD programs
Stretch
Dot by Dot (Full Screen)
Dot by Dot (1080i/p only):
Suitable for viewing wide-
screen 1.78:1 aspect ratio
Detects the resolution of the
program, stretch mode will
still show very thin black
bands at the top and
bottom of the screen.
Full Screen (720p only):
You can select "Full Screen"
only when receiving a 720p
NOTE
When using Dot by Dot or Full Screen, it is possible to see noise or bars around different outer portions of the screen. Please
change view mode to correct this.
ENG 3-14
S.Stretch (Smart stretch)
Suitable for stretching 4:3
programs to fill the screen.
signal and displays an
image with the same
number of pixels on the
screen.
signal.
Zoom
Suitable for viewing wide-
screen 2.35:1 aspect-ratio
programs in full screen.