Lighting Instructions; Lighting Your Grill; First-Time Operation - Kokomo Grills KO-BAK3BG User Manual

Lighting Instructions

Prior to using your grill, verify that all of the following is correct:
 The burner tube is free of any debris or obstruction.
 The proper gas type and regulator settings were installed.
 The proper gas connection is complete.
 Minimum clearances are maintained.
 All packaging has been removed.
 All parts and components are properly in place.
 An installer-supplied manual gas shut-off valve is fully accessible.
 LP hose is clean and inspected for cuts, wear, abrasion, or leaks. Replace if necessary
with a suitable UL, ETL or CSA listed part with internally threaded connector.

LIGHTING YOUR GRILL

 Become familiar with the safety instructions at the front of this manual. Do not smoke
while lighting the grill or checking the gas supply connections.
 Make sure that all gas connections are securely tightened and have been leak-tested with
a soapy water solution - never with a flame!
FIRST TIME OPERATION
Before cooking with your grill for the first time, burn off any foreign matter and rid the unit of
any odors by burning the unit on HIGH with the lid down for about 10 minutes. When lit, the
flame should have a bluish color to it. It may have a tint of yellow and adjustment to the air
shutters can be made to obtain a blue flame and proper gas glow. This grill should be preheated
with the main burner control settings on HIGH for five minutes with the hood closed.
Caution: Never operate the grill unattended.
PG 23