Mitsubishi Electric ATW PAR-WT40R-E Operation Manual page 9

* When the indoor unit enters an operating
mode that disables temperature setting, the
set temp. display shows "
case, the and
so the set temperature can not be changed.
When the indicator lights, this indicates
that the wireless remote controller is set as
that of a target room.
<<What's target room?>>
● The indoor unit controls the temperatures, by reference to the temperature in a target room.
● The target room can be fixed or changed according to time, using a schedule function.
● The number of rooms that can be set to as a target room is always limited to one.
When setting a target room, use the main controller.
Indoor Unit
* The above figure shows the examples when the living room is set as a target room RC 1 (wireless
remote controller 1) , and when the bed room is set as a target room RC 2 (wireless remote con-
troller 2) .
8
". In that
buttons are not active,
Kitchen Bed room
RC
Address2
Living room
RC
Address1