Power Button; Power Cord - Bissell 66T6 SERIES User Manual

O
perations

Power button

Turn the power on or off by pressing lightly
downward on the power button ( ).

Power cord

The power cord is located at the rear of the
vacuum. Gently pull out the power cord,
watching for the yellow line. Stop pulling the
power cord once the yellow line is visible.
There is also a red line, which indicates
the end of the usable cord. Do not pull the
power cord out beyond the red line.
Automatic cord rewind
Your vacuum is equipped with an automatic
cord rewind. When cleaning is finished, press
the power button OFF ( ) and grasp the plug
to disconnect from the electrical outlet. Hold
the plug and press the automatic cord rewind
button to rewind the cord automatically.
CAUTION:
Before using your vacuum,
make sure the dirt cup and
all filters are in place. Do
not operate your vacuum
without the dirt cup or
filters.
NOTICE:
While vacuuming, certain carpets
and low humidity conditions may
generate small static discharges.
The discharges are entirely
harmless and are not associated
in any way with the main power
supply.
6
w w w . b i s s e l l . c a
Power Button
Automatic
Cord Rewind
Button
CAUTION:
Be careful to avoid
injury as cord retracts
very quickly.
8 0 0 . 2 6 3 . 2 5 3 5