Sharp LC-60E77UN Service Manual page 35

Page Line
36 1 LCD TEST PATTERN
2 LCD AGI TEST PATTERN
3 LCD EVA TEST PATTERN
4 YEL TEST PATTERN
5 TV TEST PATTERN 1
6 TV TEST PATTERN 2
37 1 REGISTER ADDRESS LOWER
2 READ/WRITE
3 SLAVE ADDRESS
4 REGISTER ADDRESS UPPER
5 WRITE DATA UPPER
6 WRITE DATA LOWER
7 READ DATA UPPER
8 READ DATA LOWER
38 1 KEY LOCK(1217)
2 KOUTEI AREA ALL CLEAR
3 A MODE AREA CLEAR
4 BACKUP AREA CLEAR
5 B MODE AREA CLEAR
6 EXECUTION
39 1 ERROR STANDBY CAUSE1
2 ERROR STANDBY CAUSE2
3 ERROR STANDBY CAUSE3
4 ERROR STANDBY CAUSE4
5 ERROR STANDBY CAUSE5
6 ERROR STANDBY CAUSE
RESET
40 1 EEP SAVE
2 EEP RECOVER
3 MODL NAME
4 PANEL SIZE
5 SETTING FOR ADJ
6 PANEL LIMIT
7 PANEL RANGE LIMIT
8 SHORT CHECK MODE
9 SHORT CHECK CURRENT
10 CURRENT SW
*1 Details of P1.9 (NORMAL STANDBY CAUSE)
2 No operation off
3 No signal off
4 PC power management mode 1
5 PC power management mode 2
6 Off timer
8 Command from RS232C
Item
Writing setting values to EEPROM
Reading setting values from EEPROM
Must be Low. Don't change
LC-60E77UN/LC-65E77UM/LC-C6077UN/LC-C6577UM
Description
in the cause of "no operation off"
in the cause of "no signal off"
in the cause of "Standby mode MODE1"
in the cause of "Standby mode MODE2"
in the cause of "SLEEP timer"
in the cause of command by RS-232C
5 – 10
Remarks (adjustment detail, etc.)