Advertisement
Notes on Handling and Storage
Be sure to observe the following precautions to avoid malfunctions, operating
errors or damage to the projector.
Notes on Handling and Storage
• Do not use or store the projector in places where it might be subjected to high
and low extremes of temperature. Furthermore, avoid places where the
temperature may change suddenly.
• Be sure to observe the operating temperatures and storage temperatures
given in the User's Guide when using and storing the projector.
• Do not set up the projector in places where it might be subjected to vibration
or shock.
• Do not set up the projector near high-voltage electrical wires or sources of
magnetic fields.
These may interfere with correct operation.
• Do not operate the projector under any of the following conditions. If this is not
observed, problems with operation or accidents may result.
While the projector is
standing on its side.
• Do not tilt the projector forwards o
specified in the User's Guide. Doing so may damage the projector or cause
an accident.
• Do not touch the lens with bare hands.
• Always attach the lens cover to the lens when not using the projector, to
prevent the lens from becoming dirty or damaged.
• Remove the batteries from the remote control before storage.
If the batteries are left in the remote control for long periods, they may leak.
• Do not use or store the projector in places where smoke from oil or cigarettes
may be present, as it can adversely affect the quality of the projected images.
• Contact your dealer to clean the interior of the projector. If the interior of the
projector has not been cleaned for a long time, dust may build up, which could
cause fire or electric shock.
10
While the projector is
tilted one side.
r backwards
at an angle that is greater than
Advertisement
