Advertisement
Unplug the projector from the outlet and refer all repairs to
qualified service personnel under the following conditions:
• If smoke, strange odors or strange noises come from the projector.
• If liquid or foreign objects get inside the projector.
• If the projector has been dropped or the housing has been damaged.
Continuing to use under these conditions may result in fire or electric
shock.
Do not try to repair this projector yourself. Refer all repairs to
qualified service personnel.
Place the projector near an outlet where the plug can be easily
unplugged.
Never open any covers on the projector except as specifically
explained in the User's Guide. Never attempt to disassemble or
modify the projector (including consumables). Refer all repairs to
qualified service personnel.
Electrical voltages inside the projector can cause severe injury.
If you are installing the projector on the ceiling, this projector
should be installed by qualified technicians using only approved
mounting equipment.
If installation work is not carried out correctly, the projector could
fall down. This may result in injury or accidents. Contact your dealer
to carry out the installation work.
If you use a ceiling mount and apply adhesives to the mount to
prevent the screws from loosening, or if you use lubricants or oils
on the projector, the projector housing may crack and the projector
may fall from its ceiling mount. This could cause serious injury to
anyone under the mount and could damage the projector. When
installing or adjusting a ceiling mount, do not use adhesives to
prevent the screws from loosening and do not use oils or
lubricants.
Do not use the projector where it may be exposed to rain, water, or
excessive humidity.
Warning
Disconnect
the plug from
the outlet
Do not
disassemble
Instructions
Do not do
Do not use in
wet areas
3
Advertisement
