Samsung ProXpress C267x series User Manual page 65

Basic faxing
3 Touch (Options) > select the option you want using arrows >
(back) > Next on the touch screen (see "Adjusting the document
settings" on page 65).
4 Select a speed dial number or select a group dial number.
5 Touch Send on the touch screen.
The machine begins sending the fax to the numbers you entered in the
order in which you entered them.
21
Receiving a fax
Your machine is preset Fax mode at the factory. When you receive a fax, the
machine answers the call on a specified number of rings and automatically
receives the fax.
22
Adjusting the document settings
Before starting a fax, change the following settings according to your original's
status to get the best quality.
Accessing menus may differ from model to model (see "Menu overview" on
page 31 or "Control panel overview" on page 24).
Resolution
The default document settings produce good results when using typical text-
based originals. However, if you send originals that are of poor quality, or
contain photographs, you can adjust the resolution to produce a higher quality
fax.
The resolution setting is applied to the current fax job. To change the
default setting, see "Fax" on page 212.
1 Select (Fax) > select an item such as Memory Send, On Hook Dial,
Delayed Send, or etc. >
screen.
Select the resolution you want using arrows. Touch
2
to the previous screen.
• Standard: Originals with normal sized characters.
• Fine: Originals containing small characters or thin lines or originals
printed using a dot-matrix printer.
• Super Fine: Originals containing extremely fine detail. Super Fine
mode is enabled only if the machine with which you are
communicating also supports the Super Fine resolution.
(Options) > Resolution on the touch
(back) to go back
2. Menu Overview and Basic Setup
65