Service Position - Dell P992 Service Manual

1-6. SERVICE POSITION

Adaptor board (XT Mount) is reconstructied to use for this set.
Prepare a connector (10Pin: Black) (1-766-921-11),
1
cut of the boss on the 10-pin side.
Connector (10Pin: Black)
Boss
Remove the D board.
4
Remove the Video block assembly.
5
Install the Adaptor board
6
(XT MOUNT) (A-1391-123-A).
Lay the Video block assembly.
7
Video block assembly
5
D board
7
6
4
Remove the connector (17Pin: Black) (CN9997)
2
from Adaptor board (XT MOUNT) (A-1391-123-A).
Install the connector (10Pin: Black) onto XT Mount.
3
Connector
(10Pin: Black)
Adoptor board
(XT mount)
Install the video block assembly.
8
Video block assembly
Put a box which is about 15cm in height
9
under the D board to fix it.
(Please disconnect the CN 701 first.)
D board
Box
P992 (E)