Part Names And Functions - Mitsubishi Electric PLFY-P32VKM-A Technical & Service Manual

2

PART NAMES AND FUNCTIONS

Indoor (Main) Unit
Horizontal Air Outlet
Sets airflow horizontal automatically
during cooling or dehumidifying.
Remote controller
Operation buttons
TEMP. ADJUSTMENT button
This sets the room temperature. The
temperature setting can be performed
in 1: units
Setting range
Cooler 19: to 30:
Heater 17: to 28:
TIMER button
This switches between continuous
operation and the timer operation.
OPERATION SWITCH button
Press this button to switch the cooler,
electronic dry (dehumidify), automatic
and heater modes.
LOUVER button
This switch the horizontal fan motion
ON and OFF.
(Not available for this model.)
Air Intake
Returns air from room.
[PAR-20MAA]
Once the controls are set, the same operation mode can
be repeated by simply pressing the ON/OFF button.
TIME SETTING button
This sets the current time, start time
and stop time.
CENTRALLY CONTROLLED
CHECK
˚C
STAND BY
DEFROST
TEMP.
TIMER SET
PAR-20MAA
Filters
Remove dust and pollutants
from return air
1Hr.
ON OFF
˚C
CLOCK
FILTER
CHECK MODE
TEST RUN
ERROR CODE
FUNCTION
NOT AVAILABLE
ON/OFF
FILTER
CHECK TEST
CHECK-TEST RUN button
Only press this button to perform an
inspection check or test operation.
Do not use it for normal operation.
5
Grille
Auto Air Swing Vane
Disperses airflow up and
down and adjusts the angle
of airflow direction.
AIR SPEED button
This sets the ventilation fan speed.
ON/OFF button
This switches between the operation
and stop modes each time it is pressed.
The lamp on this button lights during
operation.
AIR DIRECTION button
This adjusts the vertical angle of the
ventilation.
FILTER button
This resets the filter service indication
display