Table of Contents
Advertisement
Chapter 2: Getting Started
2.1 Hardware Installation
1. Plug the power adapter into the power jack of the USB 3.0
4-Port Hub. (If power adapter is available)
2. Plug the USB 3.0 4-Port Hub into your computer's
SuperSpeed USB 3.0 port.
3. Upon powering up your computer, the USB 3.0 4 Ports Hub
will be recognized by the computer's operating system.
4. Once complete, you are ready to plug all peripheral devices
into your new USB 3.0 4-Port Hub.
Note: Be sure to connect USB 3.0 4-Port Hub to USB 3.0
port on the system, USB 3.0 Hub will NOT enhance USB
data transfer rate, if you connect it to traditional USB 2.0 or
USB 1.1 port. There is no addition driver for USB 3.0 4-Port
Hub. Drivers for USB 3.0 4-Port Hub is always supplied with
drivers for USB 3.0 host controllers, and are provided by
your USB 3.0 host controller vendor.
UGT-MH400U3
Page 7
Advertisement
Table of Contents
