Related Manuals for Vantec UGT-MH330GNA
Summary of Contents for Vantec UGT-MH330GNA
-
Page 1: User Manual
3-Port USB 3.0 Hub with Gigabit Ethernet User Manual Model: UGT-MH330GNA All brand names and trademarks are properties of their respective owners www.vantecusa.com... -
Page 2: Table Of Contents
Contents: Chapter 1: Introduction ......3 1.1 Product Introduction ............3 1.2 Features................3 1.3 Specifications...............4 1.4 System Requirements ..........5 1.5 Package Contents............5 1.6 Hardware Description..........6 Chapter 2: Getting Started......8 2.1 Hardware Installation ..........8 2.2 Driver Installation............9 ... -
Page 3: Chapter 1: Introduction
USB devices and at the same time connects to your network at blazing speed. The Vantec 3 Port USB 3.0 Hub with Gigabit Ethernet is an ideal solution for anyone seeking a well-designed hub which fuses a sleek and compact design without sacrificing any of its functionality. -
Page 4: Specifications
LEDs indicate the status of Power status and Ethernet connection Supports advanced link down power saving when Ethernet cable is unplugged Supports Wake-on-LAN Supports jumbo frame 1.3 Specifications Model: UGT-MH330GNA Interface: Three USB 3.0 (type A), One Gigabit Ethernet (RJ45) Material: Plastic Dimension: 91 x 66 x 18 mm UGT‐MH330GNA ... -
Page 5: System Requirements
1.4 System Requirements Windows® XP/Vista/7/8 (32/64 bit); Mac OS X 10.6/10.7/10.8 Available USB 2.0 port (USB 3.0 recommended for optimal speed) 1.5 Package Contents 1 x 3-Port USB 3.0 Hub with Gigabit Ethernet 1 x USB 3.0 Micro-B Cable 1 x User Manual 1 x Driver CD 1 x Power Adapter UGT‐MH330GNA ... -
Page 6: Hardware Description
1.6 Hardware Description Figure 1. Front UGT‐MH330GNA Page 6 ... - Page 7 Figure 2. Back LED Indications: : Power On Indicator turns on when the Docking Stations is powered up Ethernet Link/Activity Indicator turns on steadily when network link is established; Flashing when network activity is in progress UGT‐MH330GNA Page 7 ...
-
Page 8: Chapter 2: Getting Started
Chapter 2: Getting Started 2.1 Hardware Installation 1. Plug the power adapter into the power jack of the USB 3.0 Hub + Gigabit Ethernet Docking Station. 2. Connect the Notebook/PC and Docking Station with USB 3.0 cable. Plug the USB 3.0 Micro-B end of the USB cable into the Docking Station upstream connector and plug the flat end (Type A receptacle) of the USB cable into an open USB 3.0 port on the Notebook/PC. -
Page 9: Driver Installation
2.2.1 Installation for Windows Insert the provided CD into your disk drive. At the Windows Desktop, click Start, and then Run. Type D:\UGT-MH330GNA\Windows\Setup.exe, and then click OK. (Change D: to match your CD-ROM drive letter) Follow the on-screen instructions to complete the installation. -
Page 10: Har Dware Verify
Double click the “AX88179.dmg” file to launch the installer. Follow the instructions on screen to install the driver. After driver installation is complete, you must restart your computer. 2.3 Hardware Verify 2.3.1 Verifying for Windows Click on the “Device Manager” tab in the Windows Control Panel. -
Page 11: Verifying For Mac Os X
2.3.2 Verifying for Mac OS X Choose About this Mac from the Apple menu. Click on More Info… In the Contents sidebar select USB from the Hardware section. Scroll the list to reveal the USB 3.0 Hub + Gigabit Ethernet Docking Station information UGT‐MH330GNA Page 11 ... - Page 12 UGT‐MH330GNA Page 12 ...