Table of Contents
Advertisement
How about connecting USB 3.0 Hub to traditional USB 2.0
Host Port?
USB 3.0 Hub works, but only running under USB 2.0 High
Speed mode.
My USB 3.0 device does not work when connect to USB 3.0
Hub?
Please confirm your settings as below one by one.
1. Affirm USB connection cable between USB device and Hub
firmly.
2. Connect addition power adapter to your USB device, such as
enclosure.
3. Make sure PC's USB 3.0 Port works where USB 3.0 Hub
connection.
Should I use power adapter connecting to the USB 3.0 Hub?
It depends on user's application. USB 3.0 Bus power only
supports +5V@900mA standard from PC Host. If user's
device cost higher power current, an additional power
adapter is necessary. User can use
adapter for connection.
UGT-MH400U3
power
Page 9
Advertisement
Table of Contents
