Screen Setup - Sony SLV-D940P AZ Service Manual

• Audio DRC (Dynamic Range Control)
Makes the sound clear when the volume is turned down when playing a DVD that
conforms to "Audio DRC." This affects the output from the following jacks:
– OUT AUDIO L/R jacks
– DIGITAL AUDIO OUT (OPTICAL or COAXIAL) jack only when "Dolby
Digital" is set to "D-PCM."
The default setting is indicated in bold print.
Standard Normally select this position.
Wide Range Gives you the feeling of being at alive performance.
Notes
• If you connect a component that does not conform to the selected audio signal, a loud noise
(or no sound) will come out from the speakers, affecting your ears or causing the speakers to
be damaged.
• Noise may occur in the LinearPCM double-speed audio. This is not a malfunction.
• If you set "DTS" to "On," you cannot select surround setting (page 81).
60
Audio Setup
4
Press B/b to select an item.
ENTER
5
Press SET UP to exit the menu.
SET UP
Menu choices
• TV Type
Selects the aspect ratio of the connected TV (4:3 standard or wide).
The default setting is indicated in bold print.
4:3 Letter Box Select this when you connect a 4:3 screen TV. Displays a wide
picture with bands on the upper and lower portions of the screen.
Select this when you connect a 4:3 screen TV. Automatically
4:3 Pan Scan
displays the wide picture on the entire screen and cuts off the
portions that do not fit.
Select this when you connect a wide-screen TV or a TV with a wide
16:9
mode function.
4:3 Letter Box 4:3 Pan Scan
Notes
• Playback settings stored in the disc take priority over the "DVD SETUP" menu settings and
not all the functions described may work.
• Depending on the DVD, "4:3 Letter Box" may be selected automatically instead of "4:3 Pan
Scan" or vice versa.
• The connection using S-VIDEO OUT jack is only for the DVD player.
62

Screen Setup

16:9
1-14
Screen Setup
"Screen Setup" allows you to set the screen
according to the playback and connection
conditions.
1
Press SET UP when the DVD player is in stop
SET UP
mode, then press V/v to select
and press ENTER.
ENTER
2
Press V/v to select "Screen Setup," then press
ENTER.
ENTER
3
Press V/v to select "TV Type."
To set the "Progressive" setting, see page 63.
ENTER
To set the "Progressive" setting
If your TV accepts progressive (480p) format signals, you will enjoy accurate colour
reproduction and high quality image.
1
Follow step 1 and 2 on page 61, then press V/v to
select "Progressive."
2
Press B/b to select "On," then press ENTER.
3
Follow the instructions appearing on the screen.
1
Ensure your TV is (525P/625P) Progressive Scan
capable.
2 Connect with Component Video Output jacks
(red/green/blue connections).
See "Use this hookup if your TV has component
video input jacks" on page 57.
3 Press B/b to select [OK] to test your video
signal.
4
If video signal appears OK, video connection is
complete. Press ENTER.
The PROGRESSIVE indicator on the unit lights up
in orange.
If picture is distorted, press O RETURN.
Check the connection (page 57).
5
Press SET UP to exit the menu.
SET UP
V/v/B/b
ENTER
O RETURN
DVD SETUP
(DVD)
Language Setup
Audio Setup
Screen Setup
Parental Setup
V v ENTER RETURN SET UP
SCREEN SETUP
TV Type 4:3 Letter Box
[ ]
Progressive [ Off ]
V v B b SET UP
RETURN
continued
61
Screen Setup
SCREEN SETUP
TV Type [ 4:3 Letter Box ]
Progressive [ Off ]
V v B b RETURN SET UP
SCREEN SETUP
TV Type [ 4:3 Letter Box ]
Progressive [ On ]
V v B b RETURN SET UP
SCREEN SETUP
Progressive Scan Output
1) Connect with Component Video Output
jacks.
2) Select [OK] to test your video signal.
3) If video signal appears OK,
video connection is complete.
OK CANCEL
B b ENTER RETURN SET UP
SCREEN SETUP
TEST SCREEN
SCREEN SETUP
If picture is OK, press [ENTER] key.
If picture is distorted, press [RETURN] key.
To Deactivate
Press [PAUSE] on the unit for 5 seconds.
ENTER RETURN
SCREEN SETUP
TV Type
[ 4:3 Letter Box ]
Progressive [ On ]
V v B b RETURN SET UP
continued
63
Screen Setup