Sony SAL28F28 Service Manual page 16

(2.8/28) (28mm f2.8) lens for dslr camera

Hide thumbs Also See for SAL28F28:

Table of Contents

HELP07

Adhesive bond (LOCTITE 460) (Note)

Note:

Use adhesive bond (LOCTITE 460) or an equivalent article.

Do not use what becomes white after drying like quick-drying glue.

Anti-diffusion agent (A-20): J-6082-611-A

Grease (G-85):

Apply the adhesive bond ((LOCTITE 460) to the stopper screw, and attach it to the lens mount reveting block.

Apply the anti-diffusion agent (A-20) and grease (G-85) to the instruction portions of the lens mount reveting block.

Apply the grease(G-85)(3 claws)

Apply the anti-diffusion agant

(A-20)(All circumference)

Turn counterclockwise the pin of iris control plate unit to close the iris.

Attach the lens mount riveting block, aligning the cut portion of preset ring lever with the pin of iris control plate unit and the coupler

hole with the coupler.

HELP08

Oil (O-20): J-6082-610-A

Apply small amount of oil (O-20) to the instruction portion of the main spring.

Aplly small amount(O-20)(On contact area)

SAL28F28 (2.8/28) (28mm F2.8)

J-6082-626-A

Coupler Hole

Rear Light Shield Barrel Tube

Coupler

Pin of the iris control plate unit

Lens Mount Reveting Block

Apply the adhesive bond

(LOCTITE460)

HELP

Table of Contents