Release Notes - Inepro DocuPRO Installation Manual

Appendix I
Appendix I: DocuPRO Embedded Client for Xerox

Release notes

Version 7.0
Revision history
Version Description
7.0.4 First release version
7.0.5 Second release version
Introduction
In these release notes you will find all relevant information regarding this release. Please read
these release notes carefully and make sure you understand them. We strongly recommend not to
roll out this release of software directly on your working system but to test it first before going
live. If you have questions, remarks or if you want to report a problem please send an E-mail to
support@inepro.com
Disclaimer of warranty
Inepro BV makes no representations or warranties, either express or implied, by or with respect to
anything in this document, and shall not be liable for any implied warranties of merchantability or
fitness for a particular purpose or for any indirect, special or consequential damages.
Copyright © 2014, Inepro BV. All rights reserved.
"Inepro B.V." and Inepro B.V.'s products are trademarks of Inepro B.V. References to other
companies and their products use trademarks owned by the respective companies and are for
reference purpose only.
Purpose
The purpose of the Release Notes is to communicate the major new features and changes in this
release of the inepro Back office suite. It also documents known problems and work-around's.
Scope
This document describes the software release of the DocuPRO embedded for Xerox 7.0
Definitions, Acronyms and Abbreviations
iBos = inepro Back office suite;
iBom = inepro Back office manager;
About this release
The version 7 release is the first DocuPRO embedded for Xerox release. This version, version: 7.0
also includes several new features and bug fixes for the reported issues from the previous release.
Supported machines
All Xerox machines that have EIP 2.0 with a 800x480 screen resolution.
32 - DocuPRO Embedded Client for Xerox
Date Author
7-1-2014 R. Post
7-1-2013 R. Post