System Timeout; Confirmation / Error Reports - Inepro DocuPRO Installation Manual

Configuration
23.Please check the MFP. The MFP's should now have the following lock screen or
something similar depending on the device
Mandatory MFP Settings
These steps must be followed to ensure a correct installation of the MFP for the DocuPRO
embedded client for Xerox.
The specific steps, screen layouts and button/label names can differ between device models.
However the general process is the same for all supported devices.
The following options need to be configured:
§ System Timeout
§ Confirmation / Error reports must be disabled
§ Secure Access
§ Web Services
Login to the web browser admin panel via the MFP IP adress and then go to the properties tab

System Timeout

Set System Timeout to the maximum setting
At the 'services' section:
- Got to 'Security > System Timeout'
§ Set Touch User Interface System Timeout at the maximum setting (usually 60 minutes).
This is done to insure that the setting is in effect managed by the Inepro Business Server,
(setting CustomerLogoffTimeout). This is set by default at 120 seconds (2 minutes)
See section CustomerLogoffTimeout at the Business Server Settings
18 - DocuPRO Embedded Client for Xerox
28