Inepro DocuPRO Installation Manual page 21

13.At this page configurations can be made. It will also enabe configuration of the
MFP's automatically and will install the Inepro embedded application on the
devices.
14.Specify the preferred language that should be displayed on the machines. If
this is left on auto, it will use your browser language.
15.Fill out the IP or Hostname where the Inepro business server is installed and if
SSL is enabled. (This is enabled at default).
16.List all Xerox MFP IP's which should have the Inepro embedded application
installed, separated by comma. (Example 192.168.1.1, 192.168.1.2, etc. ).
17.Fill out the admin username and password of the MFP's. If this differs per
device it must be configured separately.
18.If debugging, debug logging should be enabled, otherwise leave the checkbox
empty.
19.When everything is ready click 'Configure'.
20.Now all the MFP's will almost completely be configured automatically. Some
settings must be set manually, this will be done in the MFP configuration
section . See Check MFP Settings
18
to validate the essential settings.
22
Version 7.0.9 - 15