Headlamp Exit Delay; Ambient Lighting - Ford KUGA Quick Reference Manual

AUTOWIPERS
A High sensitivity
B On
C Low sensitivity
Use the rotary control to adjust the
sensitivity of the rain sensor. With low
sensitivity, the wipers will operate when the
sensor detects a large amount of moisture
on the windshield. With high sensitivity, the
wipers will operate when the sensor detects
a small amount of moisture on the
windshield.
Keep the outside of the windshield clean.
Sensor performance will be affected if the
area around the interior mirror is dirty.
AUTOLAMPS
The headlamps will turn on and off
automatically in low light situations or
during inclement weather.
Kuga (CBS) , CG3586en enGBR, Edition date: 02/2014, None
(IF EQUIPPED)

HEADLAMP EXIT DELAY

After you switch the ignition off, you can
switch the headlamps on by pulling the
direction indicator lever toward you. You
will hear a short tone. The headlamps will
switch off automatically after three minutes
with any door open or 30 seconds after the
last door has been closed. You can cancel
this feature by pulling the direction indicator
toward you again or switching the ignition
on.

AMBIENT LIGHTING

A Color palette
B Control knob
C Search mode
Press A to cycle through the color choices.
Rotate B past the first detent to switch on
and adjust to the desired brightness.
Press C to switch on all interior lamps and
the ambient lighting. Press C again to
switch off the interior lamps and return the
ambient lighting to the previously selected
color.
The ambient lighting will switch on when
the following conditions have been met:
you switch the ignition on
you switch the headlamps on
the outside ambient light level is low.
5
(IF EQUIPPED)