Tv Setting; Mts Setting; Restore Setting - Audiovox LCD1900 B Owner's Manual

TV SETUP

TV SETTING

1. Press the TV MENU button.
2. Use the or
the setting.
3. Use the or
change the channel no.
4. Use the or
AIR (over-the-air broadcasts) to CABLE (cable/satellite broadcasts).
5. Use the or
selection. The unit will immediately search through all possible TV channels and store
those channels with signals in memory. After this is complete, the unit will switch to the
first channel found.
6. To exit the MAIN MENU and return to the normal screen, press the EXIT button.
Note : This option is available in TV mode only.
Remarks:
Channel no. : 2-69 channel for Air mode, 1-125 channel for Cable
mode.
Tuning mode : Air or Cable mode are available.
Auto tune : Searches for usable stations and stores them in
memory.
Skip : ON - Skip weak channels. OFF - No channel skip.
Fine tune : The frequency changes to allow fine tuning.
AFC : Auto frequency control.
MTS : Select the Mono sound/Stereo sound/Secondary
Audio Program (SAP). Refer to the section titled
"MTS SETTING" for instructions.
MTS (Multi-channel Television Sound) SETTING
This feature allows reception of sound other than the main audio for the program.
1. Press the TV MENU button.
2. Use the or button to select the TV setting menu, then press the
setting.
3. Use the or button to select MTS menu, and press the
(Mono, Stereo, SAP)
4. To exit the MAIN MENU and return to the normal screen, press the EXIT button on remote
control.
Note:
• MTS only operates while in TV mode.
• The SAP (Secondary Audio Programs) feature allows a TV station
to broadcast other information, which could be audio in another
language.

RESTORE SETTING

If you reset the TV to the factory settings, all your present settings on picture & sound will be
erased and replaced by the factory's default settings. However, picture setting in PC mode and
parental setting will not be erased.
PVS31195_ib_AUD_eng_26-35.pmd
button to select the TV setting menu, then press the
button to select the Channel no. setting and use the
button to select the Tuning mode and use the
button to select the Auto tune and press the
30
or
or
or button to select the options
30
28/12/2006, 14:23
button to confirm
or button to
button to change from
button to confirm the
TV MODE
button to confirm the
TV MODE