Nikon Coolpix S3700 Reference Manual page 141

Display
No access.
Could not connect.
Wi-Fi connection
terminated.
Lens error.
Try again after turning
the camera off and on.
Communications error
System error
Cause/Solution
The camera could not receive the signal
from the smart device. Establish the
wireless connection again.
Press the Z (Wi-Fi) button.
Touch an NFC-compatible smart
device to the camera.
Select Connect to smart device in
the Wi-Fi options menu.
The camera failed to establish the
connection while receiving the signals
from the smart device. Set a different
channel in Channel under Options in
the Wi-Fi options menu, and establish the
wireless connection again.
The Wi-Fi connection is disconnected in
the following situations:
When the reception is poor
When the battery level is low
When a cable is connected or
disconnected, or a memory card is
removed or inserted
Use a fully charged battery, disconnect
the TV, computer, and printer from the
camera, and establish the wireless
connection again.
If the error persists, contact your retailer
or Nikon-authorized service
representative.
An error occurred while communicating
with the printer.
Turn the camera off and reconnect the
USB cable.
An error occurred in the camera's internal
circuitry.
Turn the camera off, remove and reinsert
the battery, and turn the camera on. If the
error persists, contact your retailer or
Nikon-authorized service representative.
A
86, 101
86, 101
86, 101
123
107
123
121