By 2 Point-To-Point Alarm Codes - Linear RA-2400 Reference Manual For Programming

4.10.1

4 BY 2 POINT-TO-POINT ALARM CODES

PURPOSE:
To view and edit the 16 sensor (zone) alarm report codes.
☞ NOTE: 4 by 2 Point-to-Point Reporting must be selected
(see Section 4.10) for these codes to report.
USER RESPONSE:
ZONE CODES
✦ Enter a new two-digit alarm code for any sensor
(zone) that needs to be changed.
☞ NOTE: Entering a "0" for an alarm code will
prevent that sensor from reporting alarms.
27