Toddler Seat Installation and Use
4.
Buckle harness.
-
Insert buckle
tongues into buckle
until you hear a "click"
(Fig. 4).
-
Pull up on buckle
tongues to be sure
buckle is locked.
5.
Snugly adjust harness.
-
Pull on harness
adjustment strap to
tighten harness
(Fig. 5).
Note:
-
Harness should
allow one finger to
snugly pass between
shoulder harness strap
and child's shoulder.
-
A snug strap should not allow any slack
and should lie in a relatively straight line without
sagging. It should not press on the child's flesh or
push the child's body into an unnatural position.
WARNING!
•
For harness use, do not use the
lower anchors of the child restraint
anchorage system (LATCH system)
to attach this child restraint when
restraining a child weighing more
than 45 lb. (20 kg.) with the internal
harnesses of the child restraint. Install
with vehicle seat belt.
12
Fig. 4
Harness
Adjustment
Strap
Pull
Fig. 5
Toddler Seat Installation and Use
6.
Close and position
harness retainer.
-Snap the harness
retainer together
(Fig. 6).
-Position the harness
retainer at arm pit
level (Fig. 7).
WARNING!
•
To prevent injury from ejection, fasten
and tighten the harness system
correctly.
Removing Your Child:
1.
Open harness
retainer
(Fig. 1).
-Press on release
buttons
and pull
1
apart.
2
2.
Open buckle.
-Press red button on buckle to unlock.
3.
Remove child.
Harness
Retainer
Fig. 6
Fig. 7
1
2
2
1
Fig. 1
13