Care And Cleaning; Seat Pad Removal; Headrest Pad Removal; Cleaning - Kids Embrace COMBINATION HARNESS TO BOOSTER CAR SEAT Instruction Manual

Care and Cleaning

Harness Removal
See "Removing Harness:" section

Seat Pad Removal:

1. Unhook (4) elastic straps
from tabs on the seat
bottom (Fig. 1).
2. Unhook (2) elastic straps
from tabs on the seat back
(Fig. 2).
3. Unhook all pad fasteners
along the back and bottom
edge of the pad from the
seat shell.
4. Pull out on bottom edge
of pad at the front of the
seat to release (2) push-in
fasteners.
5. Grasp edge of pad under
armrest on one side of seat
and pull down and out to
release the fabric hook and
loop fasteners under the
armrest and on the side
of the seat. Repeat on the
other armrest (Fig. 3).
6. Lift the seat pad off of the
seat shell.

Headrest Pad Removal:

From the back of the seat, grasp the bottom edge of the
back of the headrest and pull up to release the fabric
hook and loop fasteners.
From the front of the seat, grasp the front of the two
sides of the headrest pad and pull forward to remove
headrest pad.
50
Elastic Straps
Fig. 1
Elastic Straps
Fig. 2
Fig. 3
Care and Cleaning

Cleaning:

Seat Pad: Machine wash separately in cold water -
delicate cycle. No bleach. Drip dry.
Note: Secure fabric hook and loop fasteners on
armrests and sides of pad together before washing and
drying pad.
Headrest Pad: Surface clean with a cool damp cloth
with mild soap. Drip Dry. Do not machine wash. Do not
use bleach or other harsh cleaners.

Seat Pad Attachment:

1. Place the seat pad on the seat shell.
Thread (4) elastic loops through the holes they were
removed from in the seat bottom and hook on tabs
under seat.
2. Wrap the arms of the seat pad around the armrests
on the seat shell and press the fabric hook and loop
fasteners together under the arm and along the seat
side.
3. Attach (2) push-in fasteners on front, bottom edge of
seat pad to front, bottom edge of seat shell.
4. Hook all seat shell to seat pad fasteners along the
back and bottom edge of the seat pad to the seat
shell.
5. Hook (2) elastic straps at the top of the seat back on
the seat pad to tabs on seat back.
Seat Pad Attachment is complete.

Headrest Pad Attachment:

1. Place each side of the headrest pad around each side
of the headrest and pull back onto the headrest until
the face on the headrest pad is against the back of the
inside of the headrest.
2. Insert the neck of headrest between the seat pad and
seat shell.
3. Push the fabric hook and loop fasteners on the back
of the headrest together.
Headrest Pad Attachment is complete.
continued
51