Toshiba GN-1041 Operator's Manual page 32

1. Setting Up Wireless Network
3.
4.
SUPPLEMENT: If you want to change the settings, press the [PREV] button to move back to the screen
that you want to change and then repeat the operation.
5.
32
Specify the following items and press the [NEXT] button.
TRANSMIT POWER
Select the low transmit power if you want to limit the area that the wireless
communication is enabled. If you do not have to limit the area, select [100%].
TRANSMIT RATE
Select the transmit data capacity for wireless communication. If you do not have
to specify the fixed rate, select [AUTO]. When [AUTO] is selected, this
equipment will use appropriate rate depending on the condition.
Generally select [AUTO]. The communication may fail unexpectedly if you
select a static transmit rate.
Confirm the settings and press the [FINISH] button.
• The shut down screen is displayed.
Press the [YES] button to shut down the equipment.
• The wireless settings apply after restarting the equipment.
GN-1041 Operator's Manual — Setting Up the Infrastructure Mode