Maintenance And Cleaning - Bosch GWS 22-180 LVI Original Instructions Manual

OBJ_BUCH-1528-002.book Page 17 Wednesday, July 31, 2013 10:38 AM
Action
Dismounting the quick-clamp-
ing nut
Rotating the Main Handle
(GWS 24-180 LVI/
GWS 24-230 LVI/
GWS 26-180 LVI/
GWS 26-230 LVI)
Switching On and Off
Switching On and Off (country-
specific switch version without
lock-on function)
Working effectively with the
angle grinder
Grey-marked area: Handle
(insulated gripping surface)
Selecting the admissible
grinding tool
Selecting Accessories

Maintenance and Cleaning

 For safe and proper working, always keep the machine
and ventilation slots clean.
In extreme conditions, always use dust extraction as far
as possible. Blow out ventilation slots frequently and in-
stall a residual current device (RCD). When working met-
als, conductive dust can settle in the interior of the power
tool. The total insulation of the power tool can be impaired.
Please store and handle the accessory(-ies) carefully.
If the replacement of the supply cord is necessary, this has to
be done by Bosch or an authorized Bosch service agent in or-
der to avoid a safety hazard.
After-sales Service and Application
Service
Our after-sales service responds to your questions concern-
ing maintenance and repair of your product as well as spare
Bosch Power Tools
Figure Please observe
7
8
9
10
11
12
13
–
parts. Exploded views and information on spare parts can al-
so be found under:
www.bosch-pt.com
Bosch's application service team will gladly answer questions
concerning our products and their accessories.
In all correspondence and spare parts order, please always in-
clude the 10-digit article number given on the type plate of
the machine.
Great Britain
Robert Bosch Ltd. (B.S.C.)
P.O. Box 98
Broadwater Park
North Orbital Road
Denham
Uxbridge
UB 9 5HJ
Tel. Service: (0844) 7360109
Fax: (0844) 7360146
E-Mail: boschservicecentre@bosch.com
English | 17
Page
255
256
256
256
257
257
257
258 – 259
1 609 92A 0B9 | (31.7.13)