ViewSonic N3250wb-1G Service Manual page 17

Channel Menu — To setup for TV
It is only active in TV source.
• Auto Scan: To automatically preset the channels into TVs memory by pressing◄►. Kindly
suggest you auto scan all the channels before watching your TV for the fi rst time.
Note: Auto Scan will scan twice. First scan for PAL system, and second scan for SECAM
system. After auto scan all the channels, you need not to do it again when turning on your
TV next time.
*China TV system: PAL D/K
• Manual Store: The function is to give a minute search for possible existing channels and
store them in memory.
1. Press ◄ or ► to get into "Manual Store".
2. Move the cursor to "Prog. No", and select the desired channel position with ◄►.
3. Move your cursor to "Search", and search the detectable channels with ◄►.
4. Move your cursor to "Fine Tune", and adjust the picture with ◄►.
5. Move to Store, then store the instruction with ENTER.
Note: The channel will be stored instead of the former program.
ViewSonic Corporation
14
Confidential - Do Not Copy
N3250wb-1G