Operation - Makita 5402NA Instruction Manual

To
store the hex wrench, insert the lonaer I
side of
it
into the lever.
Then w s h the shorter side of it down.
OPERATION
Grasp the rear handle with your right hand,
the front grip with your left. Set the base
plate on the workpiece to be cut without
the blade making any contact. Then turn
the tool on and wait until the blade attains
full speed. Now simply move the tool for-
ward over the workpiece surface, keeping
it
flat and advancing smoothly until the
sawing is completed. To get clean cuts,
keep your sawing line straight and your
speed advance uniform.
0
Push
Insert
Fig. 2(
I
Fig. 2'
CAUTION:
Grasp the rear handle and the front grip firmly when starting or stopping the tool, since
there is an initial and final reaction.
Rip fence (guide rule)
The handy rip fence (guide rule) allows you
to do extra-accurate straight cuts. Simply
slide the rip fence up snugly against the
side of the workpiece and secure
it
in posi-
tion with the clamp screw on the front of
the base.
It
also makes repeated cuts of
uniform width possible.
Guide rule
Fig. 2
12