Hitachi RCI-1.0FSN3 Installation & Maintenance Manual page 47

AIR PANEL
The standard utilization of this air panel is explained in these instructions.
Improper operation, or operation not made in accordance with these instructions, can result in unsatisfactory
operation and/or dangerous conditions. In such cases, the warranty does not apply.
HITACHI's liability shall not cover defects arising from any alteration performed by a customer.
All information in this manual is based on the latest product information available at the time of approval
for printing. HITACHI reserves the right to make changes at any time without notice and without incurring
any obligation.
No part of this manual may be reproduced without written permission.
Perform the test run whether there is abnormality or not after the installation work is completed.
The usage and the maintenance should be explained to a user according to "Installation & Maintenance Manual" of
the indoor unit. Describe to keep this installation manual also.
This product is designed for standard air conditioning only.
DO NOT use this product for
objects, etc.
DO NOT install the unit in the following places. It causes failure to the unit in many cases.
* Places where oil (including machinery oil) mist and steam drifts.
* Places where a lots of
* Places where
* Places where air contains high salt contents as coast regions.
* Places where with atmosphere of acidity or alkalinity.
Pay attention to the following points when the unit is installed in a hospital or other facilities where electromagnetic
wave generates from medical equipment.
* Do not install the unit in the place where the electromagnetic wave is directly radiated to the electrical box, remote
control switch cable or remote control switch.
* Install the unit at least 3 meters away from electromagnetic wave such as a radio.
DO NOT install the unit in the place where the air
It could be the cause of adverse affect to animals or plants.
DO NOT install the air panel with motion sensor (P-AP160NAE) in the following places.
It may cause misdetection, undetectable of motion or the deterioration of the motion sensor.
* Places where ambient temperature changes drastically.
* Places where excessive force or vibration is applied to the motion sensor.
* Places where static electricity or electromagnetic waves may generate.
* Places where is interference for infrared light such as glasses or mist in a detecting area.
* Places where the lens for motion sensor is exposed in high temperature and humidity for a long time.
* Places where
* Places where direct lights such as sunlight or headlight affect the motion sensor.
* Places where hot air from a heater, etc. affects directly the motion sensor.
* Places where the air
* Places where the
* Places where weather affects directly the surface of the motion sensor.
* Places where the lens surface may smudge or be damaged such as a dusty environment.
Pay attention that the detecting function will be decreased if the lens for motion sensor smudges.
In this case, wipe off smudges by a cotton swab soaked alcohol (Isopropyl alcohol is recommended.) or a soft
cloth.
(When wiping off smudges on the lens for motion sensor, do not apply excessive force. If excessive force
is applied, the resin lens may be damaged so that may cause malfunctions such as misdetection or
undetectable of the motion.)
2-132
IMPORTANT NOTICE
purposes, such as restoring foods, animals & plants, precision devices, art
gas drifts such as in hot spring.
gas may generate or
and corrosive gas exist.
returns to the motion sensor
devices such as ceiling fan, ventilating fan, etc. affect the air
directly catches to animals or plants.
hitting such as shelf, locker, etc.
1
from the indoor unit.
TC-12001