Advertisement
This is the second page of the Setup Guide. Start on the opposite side first.
How to Connect to the Range Extender
Windows 7 & Vista
Click on the Wireless icon to see available wireless
networks (For Vista, click Start > Connect To). Select
the
Amped TAP-EX
Mac OS X
Click on the Wireless icon to see available wireless
networks. Select the
Amped TAP-EX
iPad Tablet
A. Press the
Home
B. Tap the
Settings
C. Tap on
Wi-Fi
to enter the iPad's Wi-Fi settings.
D. Toggle the Wi-Fi On/Off selector switch to On.
E. Under "Choose a Network...", select:
Android Tablet
A. Tap the
Apps
menu on the tablet screen.
B. Locate and tap the
C. Under "Wireless & networks," tap
D. Tap the
Wi-Fi box
E. Under "Wi-Fi networks", select:
Accessing More Settings
Wi-Fi Settings
The Wi-Fi Settings menu allows you to access a number of settings:
Management Settings
The Management menu allows you to access a number of settings:
More Detailed Settings are Available on the Web Menu
Connect your Internet Device to the Range Extender
Open your Web Browser & Access the Setup Menu
Enter the setup web address into your browser:
http://setup.ampedwireless.com
If the URL fails to open, then try: http://192.168.1.240
Recommended browsers: Google Chrome, Safari or Internet Explorer (8.0 and up). Do not use Firefox.
IF YOU HAVE PROBLEMS ACCESSING THE WEB MENU...
a
a) Disconnect your PC from all Wi-Fi networks.
b
b) Attach an Ethernet cable (not included) between the PC and the Range Extender.
c
c) Open your web browser and go to http://setup.ampedwireless.com again.
How to Reset the Range Extender to Default Settings
There are two options to reset the Range Extender back to factory default settings:
Access the physical Reset button on the right panel of the Range Extender.
1
Hold down the Reset button for five to ten (5-10) seconds. You may need to
use a pen tip or pin to access the button. Pressing the Reset Button for less
than five (5) seconds will simply reboot the Range Extender while saving
your existing settings.
Access the Reset button through the web menu on the left side under
2
More Settings
Settings to
If you continue to have issues setting up the Range Extender, give us a call — we're here to help: 888-573-8820 or 909-217-3168
Visit our website for more support information and answers to frequently asked questions: www.ampedwireless.com/support
Amped Wireless
A Division of Newo Corporation
Copyright © 2014 Amped Wireless / Newo Corporation. All rights reserved.
Amped Wireless, Newo Corporation, Amped Wireless Logo are registered trademarks or trademarks of Newo Corporation.
network and click Connect.
Amped TAP-EX
Amped TAP-EX
network.
button to get to the homepage.
app icon.
Amped
Settings
app icon.
Wi-Fi
settings.
to turn on Wi-Fi and scan.
Amped
TAP-EX.
The Settings menu
can be accessed
from the Dashboard.
Tap Settings.
Set up a
Guest
Network
with an ID
and Security Key
that's different from
your primary
extended network.
Control when your
Extended Network is
on or off with
Schedule.
Not all features listed. Access the menu for all settings.
The Settings menu
can be accessed
from the Dashboard.
Tap Settings.
Set the timeout interval
for the screen to turn
off and set a passcode
to re-access the
screen using
Settings.
Check for the latest
software updates
using the
Firmware
Update
feature.
Not all features listed. Access the menu for all settings.
ACCESSING THE WEB MENU DOES NOT REQUIRE INTERNET ACCESS.
THE MENU IS SERVED FROM THE RANGE EXTENDER.
The web menu
Range Extender. The
to more extensive settings.
>
Management
>
Default.
Windows 8
Swipe in from the right edge to access the
charms bar, tap on Settings, select the Wi-Fi icon,
and select the
iPhone
Tap on your Settings icon, select Wi-Fi, and
choose the
TAP-EX.
Access
Screen
Dashboard
will provide you with the current status of the
More Settings
Save/Reload
Settings. Select
TAP-EX
Amped TAP-EX
network.
Amped TAP-EX
network.
Amped TAP-EX
Amped TAP-EX
Amped TAP-EX
From the Settings
menu, tap
Settings
additional Wi-Fi
features.
Adjust the distance
(output power) of your
Wi-Fi network using
Wireless Coverage
settings.
Restrict or allow
network access to
specific users via their
MAC address with
User
From the Settings
menu, tap
ment
tional device manage-
ment features.
Set the time and date
from the
settings. Set the clock
to appear on the
screen after the
Extender times out.
Share files locally from
any USB storage
device from the
Storage Sharing
menu.
Amped TAP-EX
tab on the left will give you access
Reset
Amped TAP-EX
Wi-Fi
to access
Access.
Manage-
to access addi-
Clock/Date
USB
Reset Button
v090814
Advertisement
