Table of Contents
Advertisement
to the LAN.
Static IP: Select this option to manually assign a static IP address to the Network
Camera. Enter the static IP address, Subnet mask, Default Gateway, Primary and
Secondary DNS provided by your ISP.
PPPoE (Point-to-point over Ethernet): Choose this connection type if you are
connected to the Internet via a DSL Line. Note that to utilize this feature, it requires an
account provided by your ISP. Enter the user name and password provided by your
ISP.
Click Apply or Reset to take effect.
UPnP
Only UPnP discovery supported. Enable this function to allow the user to search for
devices of interest on the network. Enter the UPnP name as you wish to show on the
intranet.
Click Apply or Reset to take effect.
DDNS (dynamic domain name service)
DynDNS: Enable the DDNS service allows your Network Camera, especially when
assigned with a dynamic IP address, to have a fixed host and domain name. Note
that before utilizing this function; please apply a dynamic domain account first. Enter
the username, password and hostname when enabled the DDNS.
30
Advertisement
Table of Contents
